FALL-OUT REMOVER

Features And Benefits:  Specially designed to remove iron dust particles embedded in paint film. These dust particles are rough to the touch and are difficult to remove. After a short period of time, these iron particles appear to the eye as tiny dots of rust. This product, a mixture of oxalic acid and detergents, removes these tiny dots of rust without damaging the paint finish.

Directions: Wash the car first, using a pressure wash detergent. If this does not remove all the rust spots, then proceed with the following treatment:

• Add 1 part of product to 2 parts of warm water.
• Apply this solution liberally to all affected surfaces of the vehicle with a large sponge.
• Keep the surface wet until any surface roughness or isolated gritty particles are felt with bare or gloved fingertips.
• Rinse the area very thoroughly with clean water to prevent corrosion. There should be no traces of product left on any surface.
• If the iron particles are not completely removed, repeat the clearing procedure. A fine nylon bristle scrub brush can be used.